| Item | Value |
|---|---|
| Measured gases | LEL flammable & toxic gases |
| Measuring range | |
| Detection principle | catalytic combustion、electrochemical |
| Accuracy | |
| Resolution | |
| Response time | |
| Ingress protection | IP65 / 66 |
| Explosion protection | |
| Operating temperature | |
| Power supply | |
| Output signal |
The Sensepoint series of flammable gas, toxic gas and oxygendetector provide high-quality and low-consumption solutions for users' industrial gas monitoring needs. Uses an approved, suitable EXD or EXE junction box for installation in potentially explosive atmospheres. Sensepoint's industry-standard outputs connect to Honeywell Analytics controllers or third-party DCS/PLC systems.
The combustible gas detector is available in versions with a % LEL or PPM detection range and is available with industry standard millivolt bridge outputs. Typical service life is greater than 5 years, after which it only needs to be replaced with a new detector.
We offer toxic gas detectors that are pre-calibrated for easy installation and also offer an industry-standard dual-wire 4/20 mA loop output. The user connection uses EXD, while the front-end intrinsically safe (IS) design allows for easy sensor replacement when charged. The IS design also eliminates the use of sintered bodies, allowing for faster response times and the detection of "sticky" gases such as chlorine and ammonia.
By delivering high performance and reliability at a reasonable cost, Sensepoint has proven its suitability in a wide range of demanding applications.
Suitable for use
Available in Flammable Gas, Toxic Gas, and Oxygen versions
High performance and low cost
Proven sensor technology
electrochemical sensors
Anti-toxic catalytic beads
Fast and reliable
The service life is generally 2 to 5 years
ATEX certified
Certified for use in hazardous areas
Ingress protection up to IP65 / 66 for use in harsh environments
Factory set operation
Easy to replace
Less training required
Flammable, toxic and Oxygen versions available
Suitable for indoor or outdoor use
IP65 as standard
It is suitable for industrial safety monitoring and on-site inspection scenarios.
Part Number《2026》: High Temp Flammable(: 2106B1200), ; Price excluded, .
| Category | Part Number | Description |
|---|---|---|
| Sensors/Probes | 2106B1200 | Sensepoint 0-100% LEL Flam. Sensor M20 |
| Sensors/Probes | 2106B1201 | Sensepoint 0-100% LEL Flam. Sensor M25 |
| Sensors/Probes | 2106B1202 | Sensepoint 0-100% LEL Flam. Sensor M26 |
| Instruments/Modules | 2106B1203 | Sensepoint Flammable M26 VQ1AB pellistor |
| Sensors/Probes | 2106B1204 | Sensepoint 0-100% LEL Flam. Sensor 3/4NPT |
| Sensors/Probes | 2106B1205 | Sensepoint ppm (0-10% LEL) Flam. Sensor M20* |
| Sensors/Probes | 2106B1206 | Sensepoint ppm (0-10% LEL) Flam. Sensor M25* |
| Sensors/Probes | 2106B1209 | Sensepoint ppm (0-10% LEL) Flam. Sensor 3/4NPT* |
| Instruments/Modules | 00705-A-1733 | 705 Flammable Detector- Aluminium- UL- 3/4NPT- 0-100% LEL |
| Sensors/Probes | 2106B2310 | Sensepoint HT Flammable Sensor (ATEX) M20* |
| Sensors/Probes | 2106B2311 | Sensepoint HT Flammable Sensor (ATEX) M25* |
| Sensors/Probes | 2106B2312 | Sensepoint HT Flammable Sensor (ATEX) 3/4 NPT* |
| Instruments/Modules | 00705-A-1735 | 705 High Temperature Flammable Detector- Aluminum- 150 deg C- UL- |