| Item | Value |
|---|---|
| Measured gases | NH3ammonia, COcarbon monoxide, NO nitric oxide, O2oxygen, NO2 nitrogen dioxide, toxic gas |
| Measuring range | 0-30% |
| Detection principle | electrochemical |
| Accuracy | ±5% |
| Resolution | 1ppm |
| Response time | |
| Ingress protection | IP66/67 |
| Explosion protection | |
| Operating temperature | -40°C to 50°C |
| Power supply | 3 volt lithium battery (CR2 camera battery) |
| Output signal |
Designed for comfort and durability, the GasAlert Extreme features a variety of effective toxic gas modes to reliably monitor any single hazardous gas. With a simple on/off operation, this singlegas detectorProvide long life with field-replaceable 2-year batteries and sensors. Calibration is a simple automated procedure and is compatible with BW's MicroDock II automated test and calibration system. A wide range of user options, multilingual display, and data logging capabilities make GasAlert Extreme a solution for many applications.
● Designed for long-term solutions for harsh conditions
● Large LCD provides real-time readings directly
● Uninterrupted work in continuous shifts — excellent battery life
● Accurate and reliable historical data recording
● Uninterrupted LCD display real-time gas concentration
● The design is compact and lightweight, making it comfortable to wear
● Waterproof
● Simple automatic calibration program; Compatible with BW MicroDock II automated test and calibration stations
● Perform full-function self-test for sensors, battery status, circuit integrity, and audible/visual alarms at startup
● Bright wide-angle visual alarm light column
● Built-in shockproof cover
● Large LCD provides real-time readings directly
● Uninterrupted work in continuous shifts — excellent battery life
● Accurate and reliable historical data recording
● Equipped with a built-in vibration alarm for high-noise areas
● Accurate and reliable historical data recording
● Multilingual support, including English, French, German, Spanish, and Portuguese
● Tamper evident settings with password protection
Reading: Displays the composition/concentration of the gas after the self-test is turned on
Calibration: Automatic calibration and zeroing
TWA/STEL: can be recorded and displayed as required
Backlight: When the light is low/when alarming/when the user presses
Peak: The background light turns on automatically when the gas exposure value button is recorded and displayed as required
Relative humidity: 5-95% RH relative humidity (non-condensing)
Sensor: Plug-in electrochemical sensor (temperature compensated)
Operating temperature: -40°C to 50°C H2S, SO2, HCN1
Alarm indication: Clearly in both audible and visual ways -30 degrees to 50 degrees CO1 indication alarm -20 degrees to 50% other gases
Visual alarm: flashing, wide-angle alarm lens and two reds
IP rating: IP66/67 rated LED warning light and alarm LCD readout
Audible alarm: 95 decibels 0.25 meters away from the detector
Battery Type: 3 volts of lithium battery (CR2 camera battery) pulse
Battery life: 2 years with swappable 3-volt battery life (standard)
Beep: 5 seconds interval (on-site selectable switch)
Volumetric weight: 28*50*95 mm/82 g
Sensor service life: greater than or equal to 3 years
It is suitable for industrial safety monitoring and on-site inspection scenarios.