| Item | Value |
|---|---|
| Measured gases | |
| Measuring range | 0～1999ppm |
| Detection principle | photoionization |
| Accuracy | ±10% of 0-100ppm isobutene calibration points |
| Resolution | |
| Response time | 20s |
| Ingress protection | IP55, water and dust resistant |
| Explosion protection | |
| Operating temperature | -10℃ ～ 40℃ |
| Power supply | 2.4V/500mAH rechargeable nickel-cadmium battery |
| Output signal |
The ToxiRAE Plus PID is a compact photoionization (PID) detector that can be used to continuously measure toxic and harmful organic gases in hazardous or industrial environments, especially for personal safety and on-site VOC detection.
• Small size and light weight, easy to carry
• 12 hours of continuous operation
• Alarm value can be set to automatically sound the alarm
Dimensions: 15.2×4.4×2.5 cm
Weight: 180g (with rechargeable battery)
Sampling method: diffusion
Housing material: engineering plastic, stainless steel cavity, rubber jacket
Ingress protection: IP55, water and dust resistant
Resistance to electromagnetic radiation: EMI/RF rating: EMC Directive 89/336/EEC
Operating temperature: -10℃ ～ 40℃
Ambient Humidity: 0% ~ 95% Relative Humidity (Non-Condensing)
ATEX certified: EEx ia IIC T4
UL/cUL/CSA Certifications: Class I, Division 1, Group A, B, C, D
Display: Single line 8-character dot matrix LCD display, automatic background light
Display language: English + symbols
Display Value: Real-time detection value, TWA value, STEL value, peak value, battery voltage
Buttons: 1 operation key, 2 function keys
Alarm Style: 95dB@30cm Buzzer, Red LED
Alarm signals: gas exceeding the standard, battery voltage is insufficient, sensor failure, battery power is low alarm
Alarm point setting: Set TWA, STEL and high/low alarm limits individually
Data storage: Data capacity for storing 4000 points
Sampling interval: 1-3600 seconds adjustable
Data Communication: Communicates with the computer via RS232 interface
Battery: 2.4V/500mAH rechargeable nickel-cadmium battery
Operating time: 12 hours of continuous operation (depending on the working environment and frequency of use)
Charging time: 10 hours
Calibration method: zero/extended calibration
Sensor configuration: PID for 10.6/11.7eV UV lampsensors
Sensor Parameters:
Detection Scope Resolution
——————————————————————
0 ～99.9ppm 0.1ppm
100 ～1999pm 1ppm
————————————————
Response time（T90）：20s
Accuracy: 0-100ppm ±10% of isobutene calibration points
It is suitable for industrial safety monitoring and on-site inspection scenarios.