| Item | Value |
|---|---|
| Measured gases | |
| Measuring range | 0.1 ～5000ppm |
| Detection principle | photoionization |
| Accuracy | ±5% of 10-2000ppm isobutene calibration points |
| Resolution | 0.1ppm |
| Response time | （T90）：2s |
| Ingress protection | IP66, water and dust resistant |
| Explosion protection | |
| Operating temperature | -20℃ ～ 50℃ |
| Power supply | 4.2V/3300mAH rechargeable lithium-ion battery, alkaline battery box uses 4 AA batteries |
| Output signal |
MiniRAE Lite is a simplified, broad-spectrum handheld volatile organic compound (VOC) gas detector with RAE's latest third-generation photoionization detector (PID) with a detection range of 0.1-5000ppm.
• The third-generation PID sensor has a short response time and a wide detection range
• Large screen graphic LCD display, graphic menu display
• Automatic backlit display with built-in lighting for easy use in dark environments
• Built-in temperature, humidity, and pressure sensor, automatic humidity compensation, to ensure measurement accuracy
• Quick sensor and battery replacement without any tools
• Automatic recognition of UV lamp models
• Automatic cleaning of sensors and UV lamps
• Multi-language display with Chinese support
• High ingress protection and completely dustproof
• Built-in powerful suction pump
• Use high-capacity lithium and alkaline batteries
| Dimensions: | 25.5×7.6×6.4 cm |
| Weight: | 738g (with lithium battery) |
| Sampling method: | Pump suction type |
| Housing material: | Engineering plastics, rubber jackets |
| Ingress protection: | IP66, water and dust resistant |
| Resistance to electromagnetic radiation: | EMI/RF rating: EMC Directive 89/336/EEC |
| Operating temperature: | -20℃ ～ 50℃ |
| Ambient Humidity: | 0% ~ 95% relative humidity (non-condensing) |
| Display: | Large screen graphic LCD display with automatic background light |
| Display Language: | Chinese/English + symbols |
| Display Value: | Real-time detection of values, peaks, battery voltage |
| Keys: | 1 operation button, 2 function keys, 1 light switch |
| Alarm Form: | 95dB@30cm buzzer, red LED |
| Alarm signals: | Excessive gas, insufficient battery voltage, sensor failure |
| Alarm point settings: | Set high/low alarm limits individually |
| Sampling pump flow rate: | 450～550cc/min |
| Battery: | 4.2V/3300mAH rechargeable lithium-ion battery, alkaline battery box uses 4 AA batteries |
| Operating time: | Can work continuously for 12 hours (depending on working environment and frequency of use) |
| Charging time: | 8 hours |
| Calibration method: | Zero/Extended Calibration |
| Sensor configuration: | PID sensor for 10.6eV UV lamp |
| Sensor Parameters: | Detection range: 0.1 ~5000ppm Resolution：0.1ppm Response time（T90）：2s Accuracy: ±5% of 10-2000ppm isobutene calibration points |
It is suitable for industrial safety monitoring and on-site inspection scenarios.