| Item | Value |
|---|---|
| Measured gases | |
| Measuring range | 0-100%LEL |
| Detection principle | electrochemical |
| Accuracy | |
| Resolution | |
| Response time | |
| Ingress protection | |
| Explosion protection | |
| Operating temperature | -20ºC-55ºC |
| Power supply | |
| Output signal |
The MX6 iBridTM Multi-gas detectors are not only the smartest product of Insco's most advanced monitoring technology, but also the world's first multi-gas monitor with a color LCD display and a choice of sensors.
The large screen color display allows the instrument to read clearly in any brightness environment, such as low and high brightness, enhancing safety. Whether outdoor, indoors or underground, potential gas hazards are easier to spot.
The MX6 iBridTM full-color multi-gas detectors can be operated with diffusion and integrated pumping, making it easy to measure remotely for personal protection and confined space entry.
The MX6 iBridTM multi-gas detectors are currently the most convenient instrument in the world to install all kinds of sensors, whether electrochemical, catalytic combustion, infrared or PID sensors can be installed on top of the instrument at the same time, providing the most effective choice for users in all walks of life.
In addition, the MX6 iBridTM full-color multi-gas detectors feature intuitive computer operation menus and five-way navigation keys that allow users to easily and intuitively select instruments and functions. Support online charts to display instant readings and record data.
MX6 iBridTM full-color multi-gas detectors provide users with comprehensive data browsing and processing capabilities with large storage data logging and downloading capabilities.
The MX6 iBridTM full-color multi-gas detectors are rugged and backed by a lifetime warranty and are fully compatible with DS2 and iNetTM instrument networks.
Color screen oversized display adapts to various light conditions
Five-way navigation buttons, menu-based software operation
Feel free to install25various sensors in the middle
At most, it can be monitored6Kinds of gases
Diffusion and pump suction type for easy switching
Impact-resistant rugged housing
Ultra-large capacity data collection
| Housing Material: | Lexan resin/ABS/stainless steel with protective rubber padding |
| Dimensions: | 135 mm x 77 mm x 43 mm – diffusion version |
| Weight: | Typical 409 g |
| Sensor principle: | Flammable gas/methane – catalytic combustion/infrared Oxygen and toxic gas – electrochemical CO2– Infrared Volatile Organic Compounds (VOCs) – 10.6 eV photoionization detector (PID) |
| Display/Readout: | STN color graphic LCD |
| Operating temperature range: | Normally: -20ºC-55ºC |
| Operating humidity range: | Typical 15%~95%, non-condensing (sustained) |
| Power/Runtime: | Rechargeable lithium-ion (Li-ion) battery case (typically 24 hours) Rechargeable enhanced lithium-ion (Li-ion) battery pack (36 hours of normal working time) Replaceable AA alkaline battery pack (10.5 hours of normal working time) |
| Certifications: | IECEx/ATEX: Intrinsically safe: EEx ia d IIC T4 Equipment group and classification: II 2G UL Laboratories (UL): Class I, Group A, B, C, D T4; AEx ia d IIC T4 Canadian Standards Association: Level I, Group A, B, C, D T4 U.S. Coal Mine Safety and Health Administration (MSHA): CFR30, Parts 18 and 22, Safe for use in methane/air mixtures GOST-R: PBExiadI X/1 ExiadIICT4 X |
| gas | Chemical formula | Measurement range | Precision |
| flammable gas | LEL (catalytic combustion) | 0-100% LEL | 1%/10 ppm |
| Flammable gas (optional) | LEL (Infrared) | 0-100% LEL | 1% |
| methane | CH4 (catalytic combustion) | 0-5% VOL | 0.01% |
| methane (optional) | CH4(Infrared) | 0-100% VOL | 1% |
| Oxygen | O2 | 0-30% of VOL | 0.1% |
| carbon monoxide | CO | 0-1,500 ppm | 1 ppm |
| carbon monoxide (optional) | CO | 0-9,999 ppm | 1 ppm |
| hydrogen sulfide | H2S | 0-500 ppm | 0.1 ppm |
| carbon monoxide / hydrogen sulfide** | CO/H2S (COSH) |
(CO) 0-1,500 ppm (H2S) 0-500 ppm |
(CO) 1 ppm (H2S) 0.1 ppm |
| Hydrogen | H2 | 0-2,000 ppm | 1 ppm |
| Nitric oxide | NO | 0-1,000 ppm | 1 ppm |
| Chlorine | Cl2 | 0-100 ppm | 0.1 ppm |
| Nitrogen dioxide | NO2 | 0-150 ppm | 0.1 ppm |
| Sulfur dioxide | SO2 | 0-150 ppm | 0.1 ppm |
| Hydrogen cyanide | HCN | 0-30 ppm | 0.1 ppm |
| Hydrogen chloride | HCl | 0-30 ppm | 0.1 ppm |
| Ammonia | NH3 | 0-500 ppm | 1 ppm |
| Chlorine dioxide | ClO2 | 0-1 ppm | 0.01 ppm |
| Phosphine | PH3 | 0-10 ppm | 0.01 ppm |
| Phosphine (optional) | PH3 | 0-1,000 ppm | 1 ppm |
| carbon dioxide | CO2 | 0-5% VOL | 0.01% |
| Volatile Organic Compounds (General) | PID | 0-2,000 ppm | 0.1 |
It is suitable for industrial safety monitoring and on-site inspection scenarios.